Khodiyar Engineering Works
Khodiyar Engineering Works
GIDC, Valsad, Gujarat
Send SMS
Send E-mail

Heat Exchanger

Manufacturer of a wide range of products which include finned tube heat exchanger, shell & tube heat exchanger and industrial finned tube heat exchangers.
Request CallBack
Finned Tube Heat Exchanger
Get Best Quote
Approx.
Rs 75,000
Per Unit

Finned Tube Heat Exchanger

With rich domain knowledge and experience in this industry, we are capable of providing Finned Tube Heat Exchanger.

Specifications:
  • Maximum Working Pressure: 16 kg/cm²
  • Material: Aluminium
  • Liquid Flow Rate: 0.2-1.0m/s
  • Tube Diameter: 10 - 18mm

Additional Information:
  • Minimum Order Quantity: 1 Unit
Request a Quote
Request CallBack
Shell & Tube Heat Exchanger
Get Best Quote
Approx.
Rs 1 Lakh
Per Onwards

Shell & Tube Heat Exchanger

Specifications:
  • Maximum shell diameter: 4600mm
  • Maximum temp.: 850℃
  • Material: Stainless Steel 304, 316 L
  • Maximum Working Pressure: 1.6Mpa

 


Additional Information:
  • Minimum Order Quantity: 1 Onwards
Request a Quote
Request CallBack
Industrial Finned Tube Heat Exchangers
Get Best Quote
Approx.
Rs 50,000
Per Onwards

Industrial Finned Tube Heat Exchangers

Specifications:
  • Liquid Flow Rate: 0.2-1.0 m/s
  • Maximum Working Pressure: 10 Mpa
  • Weight: 100-5000 kg

Other Details:

  • The method of attaching the fins over-tube is of prime importance, since even a slightest air gap between the tube and fins will defeat the whole purpose of fins over the tube.
  • Finned tubes are able to even out the heat transfer between the inside of the tube and the outside. When the heat transfer coefficient on the outside of the tube is significantly lower than the heat transfer coefficient on the inside of the tube, there is a major advantage to incorporate fins on the outside tube surface to take full advantage of the high heat transfer rate on the inside of the tube.
  • By using a finned tube with eight times as much surface on the outside of the tube, the total length of the tube required for heating the viscous oil can be reduced by one sixth, Fins are basically external surface on tube for increasing the surface area of the bare tube, resulting in a compact heat exchanger.

Additional Information:
  • Minimum Order Quantity: 1 Onwards
Request a Quote
X
Looking for “Heat Exchanger”?