Pharmaceutical Machinery

The Khodiyar Industries is one of the pioneers in Process equipment machineries for Pharmaceutical and food industry. We provide pharmaceutical machinery, pharmaceutical multi mill, multi mill machinery. Now with the growth of the Industry in his every segment and to meet the requirement of the customer and demand of process we manufacture all the pharmaceutical machineries at Thane unit for proper material handling of S.S for pharma industry.

It is used for sieving the dry raw material in powder form before mixing. It is suitable for separating the foreign particles from dry powder. The material to be screened is fed on to the centre of top screen.

The top weight on the motor shaft rotates in a plane close to the centre of the mass of assembly. Rotation of the top eccentric weight creates vibration in the horizontal plane which causes material to move across the screen cloth to periphery and undersize material is continuously discharge through a tangential outlet.

Model

GMP Model: All Contact parts from S.S. 316 and Non Contact parts from S.S. 304.
Non GMP: Contact parts from S.S 304 and Non Contact parts from M.S. (with all the required necessary documents)
Simplified design & construction which is maintenance free.
Removal of sieve is very ease.
Castor wheel can provide for mobility.

Model	12"	30"	36"	36"
Screen Size	300 mm	750 mm	900 mm	1,200 mm
Motor Capacity	0.25 HP*	0.5 HP*	0.75 HP*	0.75 HP*
Overall Dimension (L x W x H)	400 mm x 400 mm x 900 mm	900 mm x 900 mm x 1,250	1,040 mm x 1,040 x 1,250	1,600 mm x 1,400 mm x 1,260

» Send Enquiry

Pharmaceutical Multi Mill is widely used for Granulation, Pulverization and Mixing. Swinging Hammer Blades and Scrapers arrangement gives Shredding & Chopping Effect The unit consists of Motor drive & Rotor assembly.

The rotor has 4 different speeds - 1400/2200/2600/3200 RPM. The speed variation is achieved by cone pulley & belt arrangement on motor & rotor. Interchangeable Perforated Screen with Charging & Discharging Hopper is provided as per requirement.

Special Features :

Designed for continues wet or dry granulation
Beater and chopper blades made of SS316.( or SS304)
Easy to dismantle and clean
Beater drive equipped with reversible switch
Caster wheel provided for mobility
Available in Both Std. and Lab Model

» Send Enquiry

The kettle will be a hemispherical type bowl with either Steam/oil/ water heating jacket will be provided. Its supporting system is a Simple stand where no foundation is required. The contact parts of the kettle are made of S.S.316 and there is a jacket of either M.S. or S.S. 304 (as per the client requirement) and outer jacket will have the 50 mm Thk insulation of Glass wool with S.S. 304 sheet.

Special Features :

Temperature Controller & indicator will be provided for temp control & indication.
Temperature Can Be Set To Desired Temp
By Adjusting The Thermostat Provided And The Temperature Can
Be Seen In The Dial thermometer Provided
Available with the Stirrer arrangement.
Castor wheel can be provided for mobility.

» Send Enquiry

Specially designed for Pharmaceutical, food, chemical, Paint & other Industry.
Material :- Contact Parts are of S.S.316 Non contact parts are of S.S.304.
The drying ovens are normally available with choice of heating mode as electrically heated/ Steam Heated & Thermic Fluid Heated.

Capacity	12 Tray	24 Tray	48 Tray	96 Tray
No of Doors	One	One	One	Two
No of Blowers	One	One	One	Two
No of Blowers	1/0.5 H.P.	1/0.75 H.P.	1/1 H.P.	2/1.5 H.P.
Insulation	As per required Temp	As per required Temp	As per required Temp	As per required Temp
No of Trolleys			One	Two
Tray Size	16”x 32”x 1.25”	80”x 40”x3.5”
Option Available	Steam/Electric Thermic Fluid Heated	Steam/Electric Thermic Fluid Heated	Steam/Electric Thermic Fluid Heated	Steam/Electric Thermic Fluid Heated

» Send Enquiry

Available in any capacity ranging from 50 ltrs. To 1000 ltrs.
Material :- Contact Parts are of S.S.316 Non contact parts are of S.S.304. ( Can also be manufactured of M.S. with S.S. cladding.)
Can be designed according to special requirements.

» Send Enquiry

We manufacture and supply intermediate product container which is used in the pharmaceutical industry. It is made from superior quality stainless steel and has a capacity of 15-1500 ltrs.

It can also be customized as per client's requirements.

» Send Enquiry

Vibro Sifter

Multi Mill

Starch kettle

Tray Dryer

Jacketed Tank

IPCL (Intermediate Product Container)

	Pressure Vessels & Storage Tanks Pressure Vessel Storage Tanks Reactor Pharmaceutical Machinery Vibro Sifter Multi Mill Starch Kettle Tray Dryer Jacketed Tank IPCL Industrial Mixers & Blenders Ribbon Blenders Plough Share Mixer Sigma Mixture V-blender Octagonal Blender Double Cone Blender Conveyors Screw Conveyors Belt Conveyors Roller Conveyor Specialty Steel Fabrication Steel Platforms Custom Design Fabrication Heavy Fabrication Industrial Trolly & Material Handling Equipment